Ключевые слова: space application, spectrometer, proton irradiation, electron irradiation, HTS, REBCO, tapes, magnets, coils toroidal, design, fabrication
Rossi L., Verweij A., Todesco E., Rijk G.d., Steckert J., Perez J.C., Kirby G., Mentink M., Mangiarotti F.J., Nugteren J.v., Fiscarelli L., Gentini L., Mazet J., Canale M., Pincot F., Coelingh G.J.
Ключевые слова: LHC, upgrade, luminosity, correction coils, magnets, prototype, fabrication, design, design parameters, LTS, NbTi, strands, wires, insulation, winding configurations, quench properties, test results
Bottura L., Rossi L., Hagen P., Rijk G.d., Kirby G., Kate H.t., Nugteren J.v., Ruuskanen J., Murtomaki J.
Ключевые слова: high field magnets, design parameters, magnets dipole, quench protection, switches, modeling, numerical analysis, LTS, NbTi, MgB2, HTS, REBCO, Cu-based conductors, comparison, current decay, temperature rise
Ключевые слова: HTS, REBCO, coated conductors, wires round, architecture, new, high field magnets
Dhalle M., Bottura L., Goldacker W., Rossi L., Kario A., Rijk G.d., Kirby G., Kate H.H., Nugteren J.v., Gao P., Otten S., Nugteren B.v., Norder H.
Rossi L., Fleiter J., Stenvall A., Rijk G.d., Kirby G., Nugteren J.v., Ruuskanen J., Murtomaki J.S., Pincot F., Contat P., Sacristan-de-Frutos O., Wolf F.J.
Dhalle M., Bottura L., Usoskin A., Yang Y., Goldacker W., Rossi L., MOLODYK A., Long N., Willering G., Bajko M., Russenschuck S., Fazilleau P., Stenvall A., Ballarino A., Lorin C., Kario A., Rijk G.d., Bajas H., Kirby G., Kate H.t., Durante M., Lahtinen V., Markelov A., Nugteren J.v., Chiuchiolo A., Gao P., Petrone C., Perez J., Ruuskanen J., Mazet J., Murtomaki J., Pincot F., Fontalva A., Schmitz K., Contat P.
Ключевые слова: accelerator magnets, magnets dipole, coils insert, HTS, GdBCO, coated conductors, helium gas, Roebel conductors, cables, cooling technology, design parameters, quench detection, RRR parameter, training effect, degradation studies, critical caracteristics, current-voltage characteristics, n-value, temperature dependence, magnetic field distribution, quench current, current decay, joint resistances, test results
Broggi F., Chiuchiolo A., Dhalle M., Durante M., Fazilleau P., Fleiter J., Gao P., Goldacker W., Kario A., Kirby G., Haro E., Himbele J., Lorin C., Nugteren J.v., Petrone C., Rijk G.d., Ruuskanen J., Senatore C., Statera M., Stenvall A., Tixador P., Yang Y., Usoskin A., Zangenberg N.*10, Murtomaki J., Rossi L., Badel A., Bajas H., Bajko M., Ballarino A., Barth C., Betz U., Bottura L.
Ключевые слова: accelerator magnets, high field magnets, magnets dipole, modeling, numerical analysis, review, plans, HTS, coated conductors, REBCO, Roebel conductors, stacked blocks, coils model, YBCO, PLD process, IBAD process, critical caracteristics, critical current density, deposition setup, uniformity, critical current, ac losses, quench current, temperature dependence, test results
Ключевые слова: HTS, REBCO, coated conductors, Roebel conductors, critical caracteristics, irreversibility line, critical current, degradation studies, mechanical treatment, transverse strain, pressure effect, modeling, deformation, strain effects, pressure dependence, stress effects, numerical analysis
Bottura L., Usoskin A., Goldacker W., Rossi L., Larbalestier D., Senatore C., Rutt A., Ballarino A., Prause B., Schlenga K., Abraimov D., Kario A., Meledin A., Betz U., Hofacker F.
Ключевые слова: textile machines, microstructure, nanoscaled effects, long conductors, thickness dependence, distribution, critical caracteristics, critical current, flux density, helium, n-value, homogeneity, self-field effect, experimental results, HTS, coated conductors, width, geometry effects, assembled conductors, YBCO, PLD process, fabrication, doping effect, substrate stainless steel
Todesco E.., Annarella M., Ambrosio G., Apollinari G., Ballarino A., Bajas H., Bajko M., Bordini B., Bossert R., Bottura L., Cavanna E., Cheng D., Chlachidze G., Rijk G.d., Dimarco J., Ferracin P., Fleiter J., Guinchard M., Hafalia A., Holik E., Bermudez S.I., Lackner F., Marchevsky M.*4 Loeffler C., Nobrega A.*3 Perez J.C., Prestemon S., Ravaioli E., Rossi L., Sabbi G., Salmi T., Savary F., Schmalzle J., Stoynev S., Strauss T., Tartaglia M., Vallone G., Velev G., Wanderer P., Wang X., Willering G., Yu M.
Ключевые слова: LHC, luminosity, LTS, Nb3Sn, accelerator magnets, magnets dipole, critical caracteristics, coils, strands, current density, RRR parameter, design, design parameters, quench protection, training effect
Ключевые слова: high field magnets, quench protection, current decay, induction, LTS, Nb3Sn, NbTi, coils, magnets dipole, modeling computational, modeling, dissipative properties
Ambrosio G., Wang X., Rossi L., Wanderer P., Bordini B., Nobrega F., Felice H., Sabbi G., Bajko M., Todesco E., Ballarino A., Marchevsky M., Pan H., Yu M., Cheng D.W., Chlachidze G., Bajas H., Steckert J., Perez J.C., Prin H., Lackner F., Guinchard M., Ravaioli E., Bourcey N., Chiuchiolo A., Fiscarelli L., Bermudez S.I., Juchno M., Tavares S.S., Stoynev S., Vallone G., Cabon M., Kopal J.
Ключевые слова: LHC, luminosity, high field tests, LTS, Nb3Sn, magnets quadrupole, quench properties, measurement setup, critical caracteristics, current, magnetic field dependence, high voltage process, quench protection, heater, training effect, quench current, flux jumps, RRR parameter, inductance, test results, upgrade
Bottura L., Rossi L., Verweij A., Willering G., Siemko A., Bajko M., Fessia P., Hagen P., Modena M., Todesco E., Tommasini D., Auchmann B., Schmidt R., Rijk G.d., Perez J.C., Tock J.P., Naour S.L., Bruning O., Mapelli D.
Ключевые слова: LHC, magnets dipole, training effect, LTS, Nb3Sn, coils, quench current, quench, distribution, thermal loads
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.